Sysolution Receiving card D60-75
Product Introduction:
D60-75 is a receiving card launched by Sysolution Technology.It adopts 12 standard HUB75E interfaces and supports up to 24 groups of RGB parallel data; The load is up to 512X256 pixels; It has powerful processing capabilities, ultra-stable performance and high cost performance.
Loading capacity:
| Three parallel lines(RGB) | Data interfaces | Driving | Maximum load(Pixel) | Brightness correction band load(Pixel) | Chromatic correction with load(Pixel) |
| 24 group | HUB75E/12 | General | 512*256 | 512*256 | 256*320 |
| PWM | 512*256 | 512*256 | 256*320 |
| Number of cascade cards | | | |
| ≤1000PCS | 1-64 Scan | | |
Functions & Features:
| Function | Instructions |
| Improved Display Effect | - 18Bit+: Enabling 18Bit+ on the software can make the LED display gray scale enhancement by 4 times, which can effectively deal with the problem of gray scale loss of LED display due to the reduction of brightness, solve the problem of pockmarks caused by the correction of low-gray, and make the image of low-gray more delicate.
- HDR: Support HDR10 and HLG two video source standards; with the large band-carrying independent master control, input HDR10 standard or HLG standard video source, can achieve greater brightness dynamic range and color space, greatly enhancing the display picture quality, make the picture more delicate and realistic.
- Low Latency: Reduce the latency of the video source at the receiving card end, with a delay as low as 1 frame (for light boards that use driver ICs with built-in RAM)
- Quickly adjust the light and dark lines: Quickly adjust the light and dark lines on the software, fix the light and dark lines on the display caused by the box and module splicing, the adjustment process takes effect instantly and is easy to use.
- 3D function: Set the frame rate 120HZ in the parameters of the receiver card, cooperate with the independent master control that supports 3D function, turn on the 3D function in the software or the operation panel of the independent master control, and set the 3D parameters to make the screen display 3D effect.
- RGB Independent Gamma Adjustment: With the independent master control and software supporting RGB independent gamma adjustment, by adjusting the "Red Gamma", "Green Gamma" and "Blue Gamma" respectively, it can effectively control the problems of low gray unevenness and white balance drift of the display to make the picture more realistic.
- Support point-by-point brightness and chromaticity correction: with the correction software, the brightness and chromaticity of each light point of the large screen can be corrected, effectively eliminating chromatic aberration so that the brightness and chromaticity of the display can reach a high degree of consistency and improve the picture quality of the display.
- Support a variety of display effect scheme: with LedSet4.0 software to realize refresh priority and grayscale priority effect.
- Supports 90° rotation of the screen: realized with LedSet 4.0 software, the screen of the receiving card can be rotated by 90°.
- Support screen scaling function: with LedSet4.0 software, the pixels carried on the receiving card can be scaled by multiples to realize the zoom in and zoom out of the display screen.
|
| Improved Operability | - Support receiving card serial number detection: Cooperate with the network debugging function of LedSet4.0 software, the receiving card number and network port information will be displayed on the target box, and the user can obtain the location number and connection line of the receiving card.
- Support data interface customization:With LedSet4.0 software, the output data of the receiving card can be detected and edited.
- Support the construction of complex cabinets: In the advanced layout of LedSet4.0 software, cabinet modules can be quickly arranged and constructed arbitrarily.
- Support the construction of complex large screen: in the complex display connection of LedSet4.0 software, the cabinet can be quickly arranged and constructed arbitrarily.
|
| Improved Hardware Stability | - Network cable loop backup: The network port is connected through the main and backup network cable loops to increase the reliability of receiving cards in series. In the main and standby series lines, when one of them fails, the other can ensure the normal display of the screen.
- Support reset function: After the hardware online upgrade is completed, the receiving card can automatically restart the hardware online.
|
| Intelligent Software Upgrade | - Support receiving card configuration parameter read back: The current receiving card configuration parameters can be read back on LedSet4.0.
- Support network cable bit error rate detection: LedSet4.0 can monitor the quality of the network cable communication signal connected to the system hardware in real time, so as to quickly judge the quality of the network cable and eliminate faults.
- Communication monitoring function: Real-time monitoring of the working status of the receiving card on LedSet4.0.
|
Pins:
24 Parallel Data Interface Definitions
JP1-JP12 Data Interface Definition
| Description | Definition | Pin | Steward | Definition | Description |
| RGB Data Output | R | 1 | 2 | G | RGB Data |
| B | 3 | 4 | GND | earth (electric connection) |
| R | 5 | 6 | G | RGB Data |
| B | 7 | 8 | E | line decoding signal |
| line decoding signal | A | 9 | 10 | B |
| C | 11 | 12 | D |
| Shift Clock | CLK | 13 | 14 | LAT | latching signal |
| Display Enable | OE | 15 | 16 | GND | earth (electric connection) |
Note 1: Pin 15 is the display enable pin. When using PWM chip, it is GCLK signal.
J16 Definition:
| Definition | Pin | Steward | Definition |
| +5V | 1 | 2 | GND |
| FLS_CS | 3 | 4 | FLS_DO |
| FLS_CLK | 5 | 6 | FLS_DI |
| PROGRAM_B | 7 | 8 | mCONF_DONE |
| GND | 9 | 10 | +5V |
J12 Indicator Interface Definition:
| Pin | 1 | 2 | 3 | 4 | 5 |
| Definition | GND/KEY- | KEY+ | LEDR- | VCC/LED+ | LEDG- |
J14 Power Socket Definition:
| Pin | 1 | 2 | 3 | 4 |
| Definition | VCC | VCC | GND | GND |
Indicator Description:
| Indicators | Location | State | Description |
| Status indicator (green) | U1 | Flashes evenly and slowly | The receiving card works normally, the network cable is connected normally and there is no DVI signal input. |
| Flashes evenly and quickly | The receiving card works normally, the network cable loop is connected, and there is DVI signal input. |
| Off | No Gigabit network signal |
| Flash 3 times at intervals | The receiving card works normally, the network cable loop is connected, and there is DVI signal input. |
| Status indicator (red) | U3 | on | Normal power supply |
Dimension:
Working Parameter:
| Electrical parameters | Input voltage | DC3.5-5.5V |
| Rated current | 0.6A |
| Rated power | 3W |
| Working environment | Working temperature | -20℃ - 70℃ |
| Working humidity | 10%RH-90%RH |
| Storage environment | Temperature | -25℃～125℃ |
| Board size | 144.02mmX91.2mm |
| Net weight | 100.8g |
| Certification Information | RoHS compliant, CE-EMC compliant
|
